Warning: Last items in stock!
Removes stubborn grease and deep oil staining from natural and engineered stone. Also for removal of discolouration on peripheral zones in case of silicon joints and for removal of stubborn wax. Properties: Lithofin OIL-EX dissolves and absorbs oil and oil based dirt. Its paste like consistency enables the active ingredients to work on the substrate for a long time, so that even deeply ingrained dirt can be successfully removed. Field of Use: For removing oil stains or grease based dirt from marble, natural and artificial stone, concrete, etc. Ideal for kitchen work tops, garage entrances and similar areas. Directions for Use: Remove solids and surface soiling mechanically using a scraper or a brush. Apply Lithofin OIL-EX to the dry surface using a spatula, so that a coating thickness of at least 2mm is achieved. Allow to dry for approximately 12 hours. The remaing powder can be brushed off after complete drying. Please Note: some dark natural stone can show small amounts of the powder in the porous surface. If this happens please clean with Lithofin MN Power-Clean. Deeply ingrained dirt can be removed by 2 or 3 applications of the product. The active working time of the product can be prolonged by covering the area with plastic film. Do not apply under -10°C or over 25°C. Do not use on surfaces which are sensitive to solvents, lacquered, coated or synthetic surfaces. It is recommended to try the product on a small area in an inconspicuous place. Coverage: approx. 0,5m² / kg for 2 mm application thickness
|Suitable for:||Stone (Marble, Granite, Smartstone, Caesarstone, etc.)|
|Milliliters||0 - 250 ml|