Warning: Last items in stock!
Lithofin KF Cement Residue Remover is a highly active cleaning concentrate based on a special composition of acids and supporting agents. The product is nearly odourless and does not develop any vapours. Properties Lithofin KF Cement Residue Remover dissolves an organic deposits such as cement and mortar residues, residues of flexible grouting materials, efflorescence, rust and calcium deposits. The dirt can then be completely removed from the surface. Technical Data: Density: 1.1 g/cm³ pH-Value: <1 (concentrate) Appearance: clear, orange Odour: fruity acidic Solubility in Water: very good Field of Use Due to its mild odour, Lithofin KF Cement Residue Remover is particularly suitable for indoor use. For cleaning all ceramic surfaces, which need to be cleaned after laying and grouting. The original appearance of the surface is restored. Surfaces: suitable for all acid resistant ceramic wall and floor tiles, quarry tiles, porcelain, clay and brick as well as terracotta surfaces. Directions for Use Dilute Lithofin KF Cement Residue Remover approx. 1:4 with water depending on the stubbornness of the deposits. Apply the solution to the wet surface and spread with a mop, white pad or scrubbing brush. Redistribute several times. After 10 minutes, brush the surface and rinse the solution with a sponge or a wet and dry vac. Rinse well with clear water. In case of cement based grouting materials, the dilution rate can be adjusted to 1:15. Please Note: always test the product in an inconspicuous area prior to use. Acid sensitive surface such as enamel, zinc, marble, limestone, certain decorative tiles, wood, etc. must be protected against splashes. Coverage: approx. 20 to 30 m² depending on the type and degree of dirt.
|Suitable for:||Porcelain and Ceramics|
|Milliliters||501 - 1000 ml|