Warning: Last items in stock!
A special product from the LITHOFIN-Range for ceramics, quarry tiles and porcelain (KF). Lithofin KF Grout Protector is a ready to-use, solvent free special impregnator based on a combination of high quality water and oil repellent compounds. Properties Due to its low viscosity, Lithofin KF Grout Protector penetrates well into porous surfaces. Once dry, the remaining active ingredients show a good water and an excellent oil repellent effect. Oil and other substances remain on the surface where they can easily be removed before they cause stains. Removing greasy kitchen dirt becomes easier. The appearance on the surface is not altered; it may however become slightly darker. Technical Data: Density: 0.98 g/cm³ Appearance: liquid, clear, yellowish Odour: nearly odourless pH-Value: approx. 4,5 Flash Point: n.a. Solubility in Water: n.a. Field of Use For protecting absorbent, porous cement grouting especially in kitchens and sanitary areas. Absorbent,Â non-glazed tiles can also be treated. Directions for Use The surface to be treated must be absorbent, clean and free of grease. Use Lithofin KF Power-Clean for a deep cleaning of the surface. Evenly and generously apply Lithofin KF Grout Protector undiluted to the dry surface with a brush or roller. In case of highly absorbent cement grouting, repeat the application several times. After approx. 20 minutes, carefully remove all surface residues with a cloth. Do not allow the product to dry on the surface. Please Note: always try the product in an inconspicuous area prior to use. Protect glass, porcelain, polished and varnished surfaces, plastics and other sensitive surfaces against splashes. Drying Time: approx. 2 hours. The impregnator will be fully effective after 48 hours, protect the surface against water, oil, etc. during this time. Coverage: when treating grout joints: approx. 10 m² per 500 ml.
|Suitable for:||Porcelain and Ceramics|
|Milliliters||251 - 500 ml|